一、培養目標

    本學科致力于培養適應化學工程與技術等相關學科領域發展與現代化工經濟建設的國際化工高端人才。要求研究生具有高度社會責任感、良好道德修養和學術品德，掌握堅實寬廣的化學工程與技術基礎理論和系統深入的專門知識，具備優良的創新能力、團隊合作精神和寬廣的國際視野，能在現代化工等領域和行業中勝任高水平研究開發、教育和管理等創新性工作。   

二、培養年限

    博士生學制為3-4年，培養年限不超過6年。課程學習成績有效期自研究生入學開始為6年。

三、研究方向

1. 化學反應工程

2. 傳質與分離工程

3. 化工熱力學

4. 環境化學工程

5. 資源與能源化工

6. 化學工藝過程與高效裝備

7. 化工過程系統工程

8. 材料化學工程

9. 產品工程

四、課程設置與學習

1. 博士生應完成不少于7學分的課程學習，一般在入學后的前4個學習單元內完成。

2. 根據資源共享的原則，鼓勵我校研究生選修其他高校、學科具有優勢、符合本學科培養要求的專業課程，經導師和學院核準后，承認其學分。

3. 研究生課程學習實行學分制，課程不及格的研究生可在學制內參加重考或重修相同性質的課程；參加重考或重修的研究生必須經選課后取得考試資格，重考與他屆研究生同卷同堂進行，不再另行安排。重考或重修不合格累積4學分及以上者，按退學處理。

4. 在進行課程學習的同時，博士生需參與課題組的科學研究與學術活動，開展學位論文的前期工作。

五、博士候選人資格認證

1.博士候選人資格認證一般在第3學期末進行，由各二級學科成立博士候選人資格認證小組，組長由博士生導師組組長擔任。

2.博士生在規定的時間內填寫《華東理工大學博士候選人資格認證表》。

3.認證結果分四類

(1)通過者繼續完成博士論文工作。

(2)明顯不符合培養要求者，作退學處理。

(3)其他初次未通過博士候選人資格認證者，允許再參加一次認證，再次認證通過者可繼續完成博士論文工作，再次認證仍未通過者，作退學處理。

(4)到期無故不參加認證者按不通過處理。

4.開題報告

博士生入學后在導師的指導下確定研究方向，通過查閱文獻、收集資料和調查研究確定研究課題，在第3學期末前完成開題報告。開題報告須在本學科和相關學科專家參加的論證會上，就課題的研究范圍、意義和價值、擬解決的問題、研究方案及研究進度等做出說明，并進行可行性論證，經過認可后才能進行課題研究。對于科研經費的來源、試驗器材的采購和加工計劃等應盡早提前考慮并采取相應的措施。

六、論文發表

 按《華東理工大學關于研究生在學期間發表學術論文要求的暫行規定》執行。

七、學位論文與學位授予

 學位論文應在導師指導下由博士研究生本人獨立完成，學位論文必須是一篇系統、完整的學術論文。鑒于外國留學生的語言條件，來華留學研究生的論文可用中文或英文撰寫和答辯。

 博士學位論文的撰寫格式按照《華東理工大學關于研究生學位論文格式的統一要求》執行。學位論文的評閱、答辯和學位申請與授予等工作按《中華人民共和國學位條例暫行實施辦法》和《華東理工大學學位授予工作細則》的規定進行。

 研究生從事學位論文的工作內容及其所產生成果的知識產權屬華東理工大學，與外單位聯合培養研究生或聯合開展畢業論文的，根據合作合同判定。

Chemical Engineering and Technology   

(Discipline   Code：0817)

April 2017

The   degree discipline of Chemical Engineering and Technology is a national key   discipline, a top priority discipline in Shanghai, an earliest established   subject of chemical engineering and chemical technology in China. The degree   discipline is the first batch of master and doctor enrollment of Chemical   Engineering and Chemical Technology, the first batch of post-doctoral   researcher station, and the first batch of master of engineering, nationwide.   Discipline development focuses on cutting-edge research and interdisciplinary   research. In 2005, the enrollments of PhD students in secondary disciplines   of Materials Chemical Engineering and of Process System Engineering are   approved by the Ministry of Education. In 2008, the program is selected as   the 985 Project Innovation Platform for “clean and efficient of China of coal   and key technology of petroleum engineering”.

(1)Training   Objective

The discipline is aimed at fostering   chemical engineering with international high-end talent adapting to chemical   engineering and technology, other related subjects and modern chemical   industrial development. The objective requires graduate students with   personality of social responsibility, excellent moral cultivation and   academic ethics. In addition, graduates are expected to possess the   fundamental theories and systematic professional knowledge, the spirit of   innovation and teamwork and board international perspective. The graduate   will be qualified for state-of-the-art research, education and management in   modern chemical industries and related area.

(2)Academic Structure and Program Duration

The duration of program for master   students is 3-4 years, with a maximum of 6 years; the course credits are   valid for 6 years since the enrollment.

(3) Research   Fields

1.   Chemical Reaction Engineering

2.   Mass Transfer and Separation Engineering

3.   Chemical Engineering Thermodynamics

4.   Environmental Chemical Engineering

5.   Resources and Energy Chemical Engineering

6.   Chemical Technology and Efficient Process Equipment

7.System Engineering ofChemical Process

8.   Materials Chemical Engineering

9.   Product Engineering

(4) Curriculums

1. PhD students in the program must get at least 7 credits, and   usually in the first four course periods   after the enrollment.

2. Based on the principle of resource sharing, graduate students   are encouraged to take the premium and corresponding academic courses which   can meet the requirements of the disciplines in other universities.

3. The curriculum for doctor students is based on a credit   system. Students who failed courses can retake the exams or retake the   related courses; Students who retake the exams or the courses must obtain the   qualification after a course selection, and the make-up examinations will be   arranged in the following academic year along with the students of that   academic year. No special exams will be arranged. Students who fail over   credits after re-taking the exams or courses should quit the program.

4. During the course, PhD students must attend the academic   project in a research group and prepare preliminary work of the dissertation.

(5) Certification of Doctor Candidate

1. The doctor students are generally qualified at the end of the   third semester. The PhD candidates' qualification committee is established by   the secondary discipline. The director of PhD supervisor committee servers as   the director of the qualification committee.

2. PhD students must fill up the form of ＜Doctor Candidate Qualification in East China University of   Science and Technology＞. PhD students must fill up the form of ＜PhD Candidate   Qualification in East China University of Science and Technology＞.

3. The qualification results are divided into four categories

(1) Students are qualified and continue the thesis work for a   PhD degree.

(2) Students who are obvious not qualified for the degree   requirements should quit the program.

(3) Students who fail the first qualification exam are allowed   to take a second PhD qualification exam. Students can continue to complete   the PhD thesis work if they passing exam. Otherwise, students have to quit   the program.

(4) Students who don’t participate PhD qualification exam   without any reasons have to quit the program.

4. Thesis Proposal

PhD students should be clear of the research area under the   guidance of supervisors after enrollment. After the literature search and   reviews, students should confirm the research project and complete a thesis   proposal at the end of the third semester. Thesis proposal should be reported   in the demonstration meeting with experts in the related fields. The research   area, significance, value of the project, problem to be solved, research   proposal and progress of the projectetc should be discussed in the report. The feasibility of the project   should also be verified in the report. The project can be carried out after   the approval. The source of research funding, the purchase of equipments and   the plan of material processing should be considered ahead of time.

(6) Publications

The requirements of publications are determined by regulation   of＜Academic Requirements of Graduate Students During Education in   East China University of Science and Technology: Provisional Version ＞.

(7)Thesis   and Degree Awarding

The thesis should be completed independently by the PhD students   under the guidance of the supervisor. The thesis should be a systematic and   complete academic paper. Considering the language conditions of foreign   students, foreign students can write thesis and defense in English or   Chinese.

The format of the PhD thesis should be in accordance to ＜The format of   graduate degree thesis in East China University of Science and Technology＞. Thesis review,   defense and degree application and awarding is carried out according to ＜Academic   Regulations of the People's Republic of China: Provisional version＞ and ＜Regulations for the   Granting of Academic Degrees from East China University of Science and   Technology＞.

The intellectual property of the research and achievements   involved in the thesis belongs to East China University of Science and   Technology. In the case of graduate training program or thesis collaborated   with other training institutes, the intellectual property will be judged   based on the contract.